PUJIANG HENGSHENG TEXTILE CO.,LTD

High quality product, professional service, being the core supplier in laser industry!

Quality Matte Lamination Finish Polyester Laminating Pouches Film

Quality Matte Lamination Finish Polyester Laminating Pouches Film

1.PET+EVA 2.we can produce under customers' request 3.strong adhesive 4.It is anti-staticA,in high transparency and strong adhesive afeter laminate. 5.It is flat. 6.Environmental friendly 7.It passes the test of ROHS,REACH,PFOS/PFOA.

Send InquiryChat Now
Product Details

Quality Matte Lamination Finish Polyester Laminating Pouches Film

1)Information

Product name

Quality Matte Lamination Finish Polyester Laminating Pouches Film

Transfer Time

6-15 sec

Temperature 

130-150 °C

Transfer Pressure

20-30 Pound

Size 

45*60cm,48*64cm,40*60cm

Suitable heat transfer materials

Cotton, chemical fiber, cotton blended fabric, EVA, non-woven fabrics, leather and other fabrics.

Dumb degrees

7

Suitable printing method

Offset printing, screen printing, gravure, flex  hot peeling flat light heat transfer products.

Certification 

SGS; KAKEN; ITS

Color

Transparent

Sample

Free Sample Available

Quality

Strictly Quality Control System

Warranty

36 Months

Service 

Strongest Staff & Team, within 24 Hours reply

OEM & Design

Available


2) Application manual

1. Apply to printing: offset printing, screen printing, gravure, flexo hot peeling heat transfer products.

2. Applicable heat transfer materials: cotton, chemical fiber, cotton blended fabric, EVA, non-woven fabrics, leather and other heat resistant fabric

3.Peeling method:cool peeling 

4. Applicableheat transfer material: water (301, 305 series heat  transfer). Oily (JB W series heat transfer ink, HMA, 529, 530, 531 series heat transfer glue). Weak sublimation offset printing ink, etc.

5. Applicable heat transfer sticker level:A,B,C,D,E,F(According to the Kenteer company standard)


3) Product show

Matte release Pet film2.jpg

Matte release Pet film (2).jpg

Matte release Pet film2.jpg

3) Advanced production and testing equipment

hengsheng pet film machine.jpg

4) Packing&shipping

6359872979384992197346698.png

5) Products using the matters needing attention

1. before transfer,keep printing substrates clean and tidy;

2. At printing and  production, avoid contact with sharp objects, in order to avoid scratches, impact effect

3. At printing and  production, avoid contact with hot objects

4. Offset printing,pay attention to the light to take and light put, prevent scratch color printing design;

5. Putting it together should not exceed 20 after printing offset printing products, prevent print the stick.And enter pump suction wet wet room 12 h about 40 ℃,after the offset printing ink drying,then screen printing.

6. This product is applicable to water, oily silk screen printing ink

7. After Silk screen printing baking temperature between 50 ℃ to 65 ℃ advisable, to prevent high temperature lead to slight deformation generates set of bit of film  not accurate

8. Before transfer the image,cut out the other parts of the blank and with 2 mm border.

9. Transfer temperature:130℃-150℃,Trnsfer time:6-15s  Press:20-30 pounds

10. Machine time out, lift or move the machine heating panel, please be sure to tear up the film above immediately

11. In the  general situation, open the surface packaging as a printing surface

12. This material belongs to the defence of the sticky materials, but should add a proof sticker of heat transfer sticker finished product packaging.

13. Products need to be stored in a temperature: 0 ℃ to 35 ℃, relative humidity: 30% - 30% of the environment to avoid light preservation. Products for a period of 36 months (the original packaging and unopened), more than warranty please use after test.


6)Contact

222.jpg


Inquiry